How Parcel Uses ActiveX

Parcel requires the following ActiveX controls to be running on your Internet Explorer browser:

•ScaleX - For the operation of reading a scale if one is attached to your workstation's RS232 port.

•KPrint ActiveX - Required by Parcel's client-based printing functionality that allows you to print from Parcel directly to a local printer.

Parcel installs these ActiveX controls automatically. After you log in to Parcel for the first time, a popup message may be displayed stating that your current settings prohibit running ActiveX controls on this page. As a result, the page may not display correctly, and you need to change the security settings of your browser to enable ActiveX controls.

Caution: Depending on how your Parcel system is set up, you may first need to contact your System Administrator for instructions on what your company's policies and procedures are for enabling ActiveX on your Internet Explorer Web browser.

Enabling ActiveX in Internet Explorer

To enable ActiveX in Internet Explorer, do the following:

1.From the Tools menu, select Internet Options.

2.On the Internet Options dialog, click the Security tab, and then click the [Custom Level].

3.Scroll to the ActiveX controls and plugins section. Make sure the settings are as follows:

4.Click [OK], and then Click [OK] again.

5.In Parcel, click the Ship menu, then Warehouse.

6.If a Security Warning prompt appears asking if you want to install and run:

•ScaleX distributed by  BluJay Solutions,

•KPrint ActiveX distributed by BluJay Solutions

Do the following:

a.Select the check box Always trust content from BluJay Solutions.

b.Click [Yes].

7.When the Settings dialog box for the scale appears, click [SAVE].

8.Log out of Parcel.

9.In Internet Explorer, do the following:

a.From the Tools menu, select Internet Options.

b.Click the Security tab, and then click the [Custom Level].

c.Scroll to the ActiveX controls and plug-ins section. Change the "unsigned" and "not marked as safe" settings to Disable. This is what the settings should be:

f.Click [OK], and then Click [OK] again.

10.Log back in to Parcel.80