In order to print the PNG Bill of Lading from the Parcel server, you need to set up a printer for this carrier according to following procedure.

To set up a Bill of Lading printer with a Generic carrier:

1.When setting up the carrier on the Generic carrier setup screen, from the LTL Carrier drop-down list, select Yes.

2.On the Shipper Defaults > Bill of Lading tab, select (check) the Print First check box.

3.On the Shipper Defaults > Bill of Lading tab, select (check) the Print BOL at Ship Time check box.

4.Set up the printer in one of the following ways:

•On the Shipper Defaults > Bill of Lading tab, in the Printer Name field, type the IP address and network name of the printer to use for the BOL; for example, \\10.10.5.5.\Printer1.

•On the Printer Map screen under the location, to add a non-label printer (for printing the PNG BOL) for the location, enter the information for this printer. (See the following Help topic: Location Settings - Printer Map.)

Note: If you set up printers using both methods, then Parcel uses the printer in the Printer Map table.