FedEx SmartPost® - Host Names |
Scroll |
Use the Host Names page to define the hosts that you use to connect to the FedEx server. You can add, edit, or delete host names from the grid.
To add a Host Name Record
1.Click the ADD at the top of the screen. The Add Record dialog is displayed.
2.Complete the boxes as follows:
In this box... |
Do this... |
Host |
Type the IP Address or Host Name of the FedEx server. |
Port |
Type the socket/port number of the computer that connects to the FedEx server. |
Meter Number |
Type the FedEx-supplied meter number for this account. This number must be from 5 to 9 digits in length. |
Status |
The status choices if the Parcel FedEx SmartPost® module connects to the FedEx server are as follows: •Enable - Active server (the default) •Disable - Inactive server This selection serves the following functions: •To control which FedEx server is enabled. •To disable a single FedEx server if/when there is a problem with the server. (Note that this condition requires the server to be manually enabled again using the Enable check box.) Notes: •The status returned from an active FedEx server is always Enabled by default. •If all the FedEx servers become disabled, the FedEx SmartPost® module in Parcel will attempt to enable them when the problem is resolved. |
Server Version |
Accept the current default value, which is 10.x. Note: This is the only FedEx server version that Parcel 4.0 supports. |
3.Click [SAVE] to save the new record. Otherwise, click [CANCEL] to cancel the new record.
To edit a Host Name Record
1.Click the EDIT in the left column in the row containing the record that you want to edit.
2.A dialog is displayed. Edit the fields as needed.
3.Click [SAVE] at the bottom of the screen to save the changes or click [CANCEL] to cancel your changes.
To delete a Host Name Record
1.Click DELETE in the left column in the row containing the record that you want to delete.
2.A confirmation dialog box appears. Click [OK] to delete the record. Or click [Cancel] to keep the record.